Enclosing Bath Tubs

Enclosing bath tubs is frustrating job for tilers and builders as it is time and labour consuming. Marmox insulation boards can finish the job in easy 4 steps.

 

Procedures:

  1. Measure the 2 sides of the tub to be enclosed, using a hand saw or a knife to cut the boards to suit.
  2. Fix two WB brackets on the sides of the panels to be fixed to the wall and to the bottom of the panels on the floor, apply a bead of silicone on all the edges of the panels.
  3. Using a pair of PB brackets to hold the two panels together.
  4. Apply fibreglass tape to all the joints then flexible tile adhesive, after drying it is ready for tiling.

© Marmox Australia 2013. Site by oneos